Are your TV cables distracting you? If yes then this is useful to Mount a TV on the Wall without Showing the Wires.
The cord behind your TV is ugly! These cables are extremely dangerous if you have small children in your home, they quickly accumulate dust that is difficult to access and clean.
Are you distracted by TV cords? We can relate to your grief!
You may watch TV comfortably without an entertainment centre if you mount it on the wall, but the cords may appear untidy when they dangle down.
While extending your TV’s power cable beyond your wall is against electrical code, you may add a new plug without any complicated cabling by installing an in-wall power extender.
There is nothing more inconvenient than installing expensive TV on the wall, only cords will ruin the beautiful design of your room.
This helpful ‘how-to guide provides instructions and guidance to hide those annoying but necessary cords.
So continue reading to discover incredibly unique ideas that are simple and affordable to put into action.
Instructions before Mounting a TV on the Wall without showing the Wires:
1. Location:
The first consideration should be the position of the wall-mounted TV.
2. TV mounting height on the wall:
The height at which we should wall-mount a television is dictated by elements such as the TV’s size, viewing distance, and the viewer’s eye level.
3. Wall strength:
Check that the brick wall or wooden barrier is solid enough to support the weight of the wall-mounted TV.
4. Hidden wiring:
Hide the wiring for a cleaner look: exposed TV cords may be an annoyance.
5. Well-organized storage:
Make sensible storage in the TV and media unit to complement the design of the area while also providing orderly storage.
How to Mount TV on the Wall without Wires Showing?
1. Safety check and mark the wall:
Take out your stud/live wire detector and check the area where you wish to hide the TV cables.
Mark in pencil where your cables run and where your studs (if any) are so you have a clear image of what’s lying beneath the plasterboard.
2. Thoroughly check the Socket Area and Cable Length:
If you want the cable to come out near some sockets further down on the wall, check around this region to make sure it’s safe to drill and cut.
It Is important to verify the length of the wires you intend to hide at this stage since this will help you choose where to place the entrance and exit points.
3. Select the Location of the Wire Openings:
Once you’ve hung your object or TV and planned out, you’re wiring and obstructions, select where you want the two apertures to go.
Placing them directly over one another will make it simpler to slide the wire through.
4. Get ready to Set up the Wall Plate:
Remove the brush piece of the wall plate, then use a spirit level to mark the interior square or rectangle and screw holes in the wall.
I did this directly next to the TV wall mount How to Mount TV on Wall without Showing the Wires so that the TV would disguise the exit point and the entry point would be right next to and in line with the existing wall outlets below.
5. Drill the Entry and Exit Holes:
Use your wire detector to confirm that there are no obstructions behind the entry and exit locations after you’ve located them.
Cut the hole next using the flat wood cutting bit on your multi-tool.
Drill holes into each of the four corners without a multi-tool, then use a plasterboard knife to cut off the squares.
6. Unplug the Cords from the Television:
Remove the cables from your TV and prepare them for feeding through.
You can connect the face plates now or after the wires have been fed through the wall.
7. Fix the front plates:
To attach the face plates, use a wood drill bit to drill the hole you designated the screw hole.
Attach the plate with the appropriate plasterboard roll plugs and screws.
Do this for both entry and exit locations, but leave the brush in front now.
8. Install the wire on the back of the wall:
To install the wire behind the wall cut a string longer than the distance between your entry and exit sites, then add weight to one end (I used a drill bit), leaving enough thread to connect the wire or knot-free enough to undo.
Put this weight in the top hole and pull it back against the wall by gravity as you feed the string – don’t let go!
Continue feeding until it is visible from the exit point (bottom hole).
Grab it and remove it without leaving the top of the string.
9. Insert the cable behind the wall:
Start drawing the string’s top end up behind the wall after tying the string’s bottom end around your cable.
Pull enough to plug in the TV and disconnect the string once you reach the top.
Do the same thing with any additional wires.
10. Finished up:
Once you have gone through all your wires, run the ends with a brush and clip them to the face plate.
Connect the cords to both ends, set your TV on the bracket you placed, and put your furniture back on because you’re done!
Amazing!
How to Hide TV wires without Cutting the Wall:
Here are some basic ways Mount TV on Wall without Showing the Wires.
Use a self-adhesive wall cable to conceal your cable if your television is mounted on the wall, It is often composed of plastic, which you may trim to the desired length before sticking to the wall behind your screen.
Before clamping the cover, keep your wires inside the compact, cable-tidy kits that can usually be purchased at a specific area price.
Paint your cable neatly like a wall for added aesthetic points and it will disappear! If your TV is mounted on someone, hide the wire in the media unit.
Most TVs will have a pre-drilled hole for you to run the cables through; otherwise, you’ll have to drill one yourself. Look for a local carpenter or mechanic who can assist you.
Another option is to conceal the cables beneath the furniture above.
Use sticky cord clips, and snake wires under the TV and behind furniture without worrying about breaking anything or getting the cords tangled.
D-line cable trunking can be used to elegantly hide cables around the skirting, especially if they need to extend into some other room.
How to Hide Television Wires in a Wall?
If you are eager to get rid of all the cables, here is how to hide them in studs and brick walls:
Wall Studs: It is extremely easy to hide the wire under the plasterboard in the stud wall.
Just drill a hole in the back of the TV and make another hole in the bottom where you want the cables to come out.
Tap your wires on something that can be fed under the plasterboard, such as trunking, and then pull that out at the bottom.
A socket box will give a nice touch to both ends.
If you happen to strike a wall halfway through, you’ll have to cut another hole in the wall, and then refill the mid-way hole when you’re through.
Brick wall: Although it is more difficult and messier, hiding cables in solid walls produces a smooth result.
To put a television cable through a wall, first, remove the plaster and brickwork using a hammer and chisel.
To secure both the wall and the wires, factor the length of the trunking or conduit into the chasing. If you need to add more wires in the future, this will also be helpful.
Then comes the restoration work, which includes replastering and repainting the area until the wall is restored and the wires are removed.
We strongly advise hiring a professional electrician, they’ll know precisely where to chip the wall away and how to route the wiring.
This will prevent you from causing unneeded harm to your walls.
Also read: How To Build a False Wall for TV and Fireplace?
FAQ: How to Mount TV on Wall without Showing the Wires?
The easiest solution is to place a stack of books, a candle, or other ornamental objects in front of the cables to conceal them.
Alternatively, use sticky cable hooks to hide the wires around the bottom of the TV and feed them down from the bottom corner.
Then, in front of it, place a small houseplant to hide the cables while not interfering with the screen.
You will have to pay between $ 80- $ 100 to put the cable on the wall.
The price may vary depending on the type of wall, but a professional can do the job in a day and guarantee that the star complies with building and fire regulations.
Use binder clips to conceal cables.
Use book arrangements to conceal cables on wall surfaces.
Using a Book to Hide Wires from a Router. Gift boxes may be used to conceal unsightly wires.
Using Wall Art to Hide Wires on Wall Surfaces.
Use a TV Panel to Cover Wires on a Wall.
Use a Magician’s Cloth to cover wires on wall surfaces behind a table.
Also read: How to Decorate a Slanted Wall Bedroom?
Conclusion:
There are many options to Mount TV on Wall without Showing the Wires?, if you’re sick of seeing the ugly cables under your TV, it’s time to take responsibility and make them disappear.
The majority of operations take an hour or less to perform, select the one that best meets your needs.
If you want to go the classic route, install the raceway and paint it like your wall and if you don’t want to spend money, hide the wire behind other items.
Do you want to do something creative?
Make your wires into wall art or hide them behind interesting trim work.
You have a lot of possibilities whichever option you choose; planning is an important first step before starting work.
Don’t skip that, especially if the work requires multiple stages.
Hide your TV cable to make your living room (or any other room) not only organized and prettier but also safe for small kids, elders, and pets.
Section Under: How To
